Description
The Show Batten 100 is a LED moving bar designed for stage lighting professionals. Ten high-power Osram Ostar RGBW LEDs are housed inside a 100 cm long (39) cylindrical aluminium bar. Each parameter of each LED may be controlled individually: color, 16 bit dimmer and 24 Hz strobe.
The Show Batten lens is fitted with a wide electronic linear zoom. The Show Batten AS version has a special ovalizer filter instead of the standard lens, which increases the projection angle on a single axis.
This is particularly suitable for wall washing. The zoom is very fast: 0.3 s from min. to max.
The colors are generated through R, G, B and W channels, and may also be chosen from a wide palette consisting of over sixty macros. The color temperature can be linearly adjusted from 2500 K to 8000 K thanks to control through a dedicated CTO channel. The Show Batten has a 240° tilt and can rotate very smoothly and very fast (240° in as little as 0.2 s). It is compact, rugged and lightweight: only 9 kg (19.8 lbs). Several bars may be arranged in a line or a matrix, with a constant fixed distance between the LEDs. An internal Ethernet switch for IN/OUT daisy-chain connection makes it easy to connect the bars up for pixel control in a matrix arrangement.
Light source: 10 X 15W Osram Ostar RGBW LEDs
Distance between LEDs: 100 mm (4)
STANDARD VERSION: – Optical unit with motorized zoom: minimum 10° x 23°, maximum 43° x 48° (at 50%); minimum 23° x 35°, maximum 66° x 76° (at 10%); – High brightness: 3340 lumens
AS VERSION: – Asymmetrical optical unit with special motorized zoom for illuminating backdrops: minimum 8° x 25°, maximum 9° x 45° (at 50%); minimum 18° x 37°, maximum 21° x 74° (at 10%); – High brightness: 5210 lumens
Independent RGBW color control for each individual LED
Effects: dimmer (16 bit), 24 Hz strobe, color macros and effect macros
High speed motorized tilt: 240°
Art-Net / RDM
Internal Ethernet switch for IN/OUT daisy-chain connection to make it easy to connect bars up for pixel control in a matrix arrangement
The length and width of the bar allow it to be assembled in horizontal and vertical matrices with a fixed distance between LEDs (100mm/4)
Sockets within the dimensions of the bar to prevent accidental contact with adjacent trusses or bars in matrix arrangements
POWER SUPPLIES
100/240V 50/60 Hz
Automatic power supply
INPUT POWER
170 VA
Max 1700VA connecting max 10 units
Total lumen output:
– Show-Batten 100: Max 2,840 lm
– Show-Batten 100 AS: Max 2,590 lm
LAMP SOURCE
10x15W RGBW LEDs
– Type: OSRAM OSTAR – SMT LE RTDUW S2W
– Color Temperature: 6,000 K
– Average Life: 50,000 h
– Luminous flux: 6,800 lm
OPTICS
45mm diameter lens
– Show-Batten 100: Zoom: min. 10°x23°, max. 43°x48° (at 50%); min. 23°x35°, max. 66°x76° (at 10%)
– Show-Batten 100 AS: Zoom: min. 8°x25°, max. 9°x45° (at 50%); min. 18°x37°, max. 21°x74° (at 10%)
Fast Speed: 0.3 sec
COLOR SYSTEM
RGBW System
Individual color RGBW control for each LED
8000K- 2500 K Color temperature correction
Macro Colors
EFFECTS SECTION
Global dimmer
Strobe from 1 to 20 flashes/sec
Random and macro strobe
CONTROL AND PROGRAMMING
10 DMX 512 channels in standard mode
50 DMX 512 channels in extended mode
DMX protocol signal: USITT DMX 512
Art-Net / RDM
Display: LCD 2 lines with 16 characters each,backlit LED, white on black
Tilt Resolution: 8 bit
Dimmer Resolution: 8 bit
Strobe 20Hz
DMX signal connection: 5 pole XLR input and output
Software upload through DMX input
BODY
Body extruded in black anodized aluminum
Aluminum and steel structure with plastic covers
MOVING BODY
Automatic repositioning of TILT after accidental movement not controlled by control unit.
PAN: No Rotation
TILT: Angle rotation: 240°; Fast speed: 0,2 sec; Resolution tilt: 0,94
ELECTRONICS
Long life self-charging buffer battery
Electronic monitoring with status error
Cooling system monitoring
DMX level monitoring on all channels
Internal data transmission diagnostics
Firmware upgrade with no power
Firmware upload from another fixture
SAFETY DEVICES
Automatic shut-down in case of power supplyovercurrent or overheating
Automatic derating, in case of LED overheating
Forced ventilation with fans and heat sink
WORKING POSITION
Any working position
Hanging system: with fast-lock omega clamps (1/4 turn) on the base
CE MARKING
In conformity with the European Directives:
2006/95/EC – Safety of electrical equipment supplied at low voltage (LVD)
2004/108/EC – Electromagnetic Compatibility (EMC)
2011/65/EU – Restriction of the use of certain hazardous substances (RoHS)
2009/125/EC – EcoDesign requirements for Energy-related Products (ErP)
ETL
This product is available, on demand, with cETLus Listed Mark, that complies with the UL 1573, UL 8750 and CSA C22.2 No. 166 standards.
WEIGHT
10 kg (22 lbs)
