Description
MAC Encore Performance CLD integrates cutting-edge LED
technology with a proprietary and innovative light engine carefully
engineered to generate pristine, full spectrum light with ultra-high
color rendition. The feature-packed moving head offers unparalleled
6000 K crisp, neutral daylight. Its advanced color mixing system
delivers the full palette from smooth and subtle pastels to rich and
vibrant saturated colors. Moreover, it offers a fully variable color
correction to tungsten/orange.
PHYSICAL
Length: 452 mm (17.8 in.)
Width (across yoke): 480 mm (18.9 in.)
Height (maximum): 740 mm (29.2 in.)
Height (head straight up): 731 mm (28.8 in.)
Weight: 31 kg (68.4 lbs.)
Minimum center-to-center distance in side-by-side installation: 700 mm (27.6 in.)
DYNAMIC EFFECTS
Color mixing: CMY, independently variable 0 – 100%
Color temperature control: Variable 6000 – 2700 K
Color wheel: 6 x interchangeable dichroic filters + open, indexing, continuous rotation,
random color
Rotating gobo wheel: 5 x interchangeable texture/breakup gobos + open, indexing,
continuous rotation and shake
Gobo animation: Interchangeable animation wheel, indexing, continuous rotation with
variable speed and direction
Framing: Rotatable framing module, +/- 55°, 4 x individually controllable blades with
variable angle and position
Iris: Variable 0 – 100%
Frost: Variable 0 – 100%
Dimmer/shutter: 0 – 100% continuous dimming, regular and random strobe and pulse
effects, instant open and blackout
Dimming options: Choice of four dimming curves
Pre-programmed effects: Two ranges of FX, independent or synchronized/combined
Focus: Range varies with zoom angle, from approx. 2 m (6.6 ft.) / 6 m (19.7 ft.) to
infinity
Zoom: Motorized
Pan: 540°
Tilt: 268°
Position correction system: Absolute position monitoring
CONTROL AND PROGRAMMING
DMX channels: 38
Setting and addressing: Control panel with backlit graphic display and jog wheel or
via DMX
16-bit control: Dimming, rotating gobos, zoom, focus, pan and tilt
Movement control options: Tracking and vector
Fixture identification: User-settable ID number
DMX compliance: USITT DMX512-A
RDM compliance: ANSI/ESTA E1.20
Transceiver: Opto-isolated RS-485
Fixture software update: USB memory device or over DMX link
OPTICS
Light source: 6000 K white LEDs
Total LED engine power: 468 W
Minimum LED lifetime: 50 000 hours (to >80% luminous output)*
Zoom range: 12° – 48° one-tenth peak (1:4)
*Figure obtained under manufacturer`s test conditions
PHOTOMETRIC DATA
Light engine luminous output: = 39 400 lumens
Fixture luminous output: 11 600 lumens
CRI (Color Rendering Index): >80
CQS (Color Quality Scale): >80
TM-30 Rf (IES TM-30-15 Fidelity Index): >80
TM-30 Rg (IES TM-30-15 Gamut Index): >95
TLCI (Television Lighting Consistency Index): >70
CONSTRUCTION
Color: Black
Housing: High-impact flame-retardant thermoplastic
Protection rating: IP20
INSTALLATION
Mounting points: 4 pairs of 1/4-turn locks
Location: Dry location only, must be fastened to surface or structure
Orientation: Any
Minimum distance to combustible materials: 0.2 m (8 in.)
Minimum distance to illuminated surfaces: 2.0 m (6.6 ft.)
CONNECTIONS
AC power input: Neutrik TRUE1 socket (accepts Neutrik TRUE1 NAC3FX-W connector)
DMX and RDM data in/out: 5-pin locking XLR
ELECTRICAL
AC power: 120-240 V nominal, 50/60 Hz
Power supply unit: Auto-ranging electronic switch-mode
Power consumption, all effects static, zero light output: 64 W
Half-cycle RMS inrush curent at 230 V, 50 Hz: 10.3 A
TYPICAL POWER AND CURRENT
120 V, 60 Hz: 5.0 A, 596 W, PF 0.998
208 V, 60 Hz: 2.9 A, 581 W, PF 0.988
230 V, 50 Hz: 2.6 A, 580 W, PF 0.981
240 V, 50 Hz: 2.2 A, 585 W, PF 0.979
THERMAL
Cooling: Combined convection and forced air (temperature-regulated, low noise, userdefinable
levels)
Maximum surface temperature, steady state, Ta=40° C: 75° C (167° F)
Maximum ambient temperature (Ta max.): 40° C (104° F)
Minimum ambient temperature (Ta min.): 5° C (41° F)
Total heat dissipation (calculated, +/- 10%): 2000 BTU/hr.
